reBlanX®

Refill material für CAD/CAM milling blanks, Autopolymer

CAD/CAM resin, autopolymer. Acrylic resin for refilling CAD/CAM milling blanks in the dental laboratory.

Indications

  • CAD/CAM fabrication of bite splints
  • CAD/CAM fabrication of denture bases
  • CAD/CAM fabrication of crowns and bridges

Product features

  • universal application, can be used for refilling all PMMA blanks
  • very simple processing, optimal chip behavior when milling
  • optimal mucous membrane compatibility due to low residual monomer content
  • minimal shrinkage, no tension within the material thanks to controlled polymerisation
  • homogeneous surface, very low plaque susceptibility
  • easy finishing and polishing
  • absolutely color stable and cadmium free
  • evaluated and certified biocompatibility

Mixing ratio:
10g of powder with 5-6g of liquid

Processing times:
Swelling phase: approx. 30 sec
Pouring phase: approx. 2-3 min
Plastic phase: approx 5-7 min

Polymerization:
The polymerization is carried out under a pressure of 2-3 bar and a water temperature of 55°C for about 30 minutes.

Shades:
The polymer is available in colorless/clear, pink, pink V (veined) and pink C34 as well as in dentin color A2.
Colored monomers are available in pink, red, yellow, violet, black, petrol, magenta, light blue, neon red, neon green and neon orange.

Delivery forms:

Powder: 100g, 1.000g, 5.000g, 10kg
Liquid: 80ml, 500ml, 5.000ml
additional sizes upon request

Note:
Medical device. Due to the lack of normative requirements, the classification is made according to the product standard for denture base acrylics, ISO 20795-1, type 2 class 1 and according to MDD 93/42/EEC Annex IX, class IIa for removable and for fixed dentures.

mechanical properties acc. to ISO 20795-1 Requirements reBlanX®
Ultimate flexural strength in MPa min. 60 73
Flexural modulus in MPa min. 1500 2400
Maximum stress intensity factor in MPa not required > 1,5
Total fracture work in J/m² not required > 290
additional properties acc. to ISO 20795-1 Requirements reBlanX®
Water absorption in μg/mm³ max. 32 21
Solubility in μg/mm³ max. 8,0 2,4
Residual monomer in % (Refill specimen after 24 h storage) max. 4,5 ≤ 1
other requirements reBlanX®
ISO 20795-1 Requirements concerning the packing plasticity not required
ISO 20795-1 Requirements concerning the surface characteristics and the shape capability fulfilled
ISO 20795-1 Requirements concerning the color and the color stability fulfilled
ISO 20795-1 Requirements concerning the translucency and the freedom from porosity fulfilled
ISO 20795-1 Requirements concerning the bonding to synthetic polymer teeth fulfilled
ISO 10993 Requirements concerning the biocompatibility fulfilled